Girovac Ltd
Print

XDS46i SCROLL PUMP 60.0M3/Hr

XDS Scroll pumps are an excellent alternative to rotary vane pumps where oil free pumping is desirable. The XDS pumps, with pumping speeds of 35, 40 and 95 m3h-1, in particular use an innovative bearing shield to isolate the vacuum environment from all forms of lubricant not only making them totally dry, but also protecting the bearing from any process gases. Vapour handling is enabled by an adjustable gas ballast; this allows the range of pumps to satisfy many applications that were previously off limits to other scroll pumps.

Description

• Lubricant-free within the vacuum envelope and hermetically sealed means a totally clean and dry vacuum to prevent cross contamination.
• No atmosphere to vacuum shaft seals means bearings are completely isolated, this prevents process attack and enable the bearings to run cooler and last longer.
• No oil to change eliminating cost of contaminated oil disposal.
• Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time.
• Inverter drive for consistent pumping speeds worldwide.

 

Characteristics

Nominal rotational speed 1750 rpm
Displacement 60.0 m3h-1  /  35.0 ft3min-1
Peak pumping speed 40.0 m3h-1  /  23.5 ft3min-1
Ultimate vacuum (total pressure) 0.050 mbar  /  0.040 Torr
Max Continuous Inlet Pressure 40 mbar / 30 Torr
Max Continuous Outlet Pressure 0.2 bar gauge / 2.9 psig
Max Allowed inlet and GB Pressure 0.5 bar gauge / 7 psig
Motor power 1-ph 520 W
Power connector 1-ph IEC EN60320 C19
Recommended fuse 10A, 250Vac rms
Weight 48.0 kg  /  105 lb
Inlet flange NW40
Exhaust flange NW25
Noise level 55.4 dB(A)
Vibration at inlet flange < 4.5 mms-1   (rms)
Leak tightness (static) < 1x10-6 mbar ls-1
Operating temperature range 10 to 40 °C  /  41 to 104 °F

cant find vacuum pump

  • woosunglogo.jpg
  • oerlikon.jpg
  • vacuubrand.jpg
  • busch.jpg
  • 2014_Composites_UK_Member_Logo.jpg
  • edwards.jpg
  • mils.jpg
  • pfeiffer-vacuum.jpg
  • knf-lab.jpg